Technical information

COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001
5-5
CHAPTER 5 TROUBLESHOOTING IMAGE FAULTS/MALFUNCTIONS
1.2 Points of the Scheduled Servicing
F05-102-01
Pattern reading unit
(LED/shutter)
Separation/Pre-fixing
charging assembly
Scanner rail
Standard white plate
No. 1 through No. 3 mirror
Reflecting shade
Lint-free paper
Blower brush
Alcohol
Lint-free paper
Alcohol
Blower brush
Alcohol
Lint-free paper
Cleaning (Note 1)
Cleaning
Cleaning (Note 4)
Cleaning (Note 4)
Cleaning (Note 2)
(Note 4)
Parts Tools/solvents Work/remarks
Oil applying blade
Thermistor (upper / lower)
Upper separation claw
Alcohol
Lint-free paper
Solvent
Lint-free paper
Solvent
Lint-free paper
Cleaning
Cleaning
Cleaning
Parts Tools/solvents Work/remarks
Oil removing blade
Inlet guide plate
Transfer blade
Waste toner box
Alcohol
Lint-free paper
Lint-free paper
Cotton swab
Cleaning
Cleaning
Cleaning
Collecting the box
Solvent
Parts Tools/solvents Work/remarks
Primary/pre-primary
charging assembly
Cleaner side seal
Cleaner end seal
Scoop-up sheet
No. 2 scoop-up sheet
SALT sensor/Shutter
Alcohol
Lint-free paper
Cleaning
Cleaning (Note 3)
Parts Tools/solvents Work/remarks
Dust-proofing glass
Pick-up/feeding/separation
roller
Lint-free paper
Blower brush
Alcohol
Lint-free paper
Cleaning (Note 3)
Cleaning
Blower brush
Lint-free paper
Blower brush
Lint-free paper
Blower brush
Lint-free paper
Blower brush
Cleaning (Note 3)
Cleaning (Note 3)
Dry-wiping; do not use
solvent.
Transfer belt waste toner box Collecting the box
Note 1:
Take care not to apply force to the LED or to keep the CCD free of dust.
Note 2:
Take care not to touch the mirror or the lens and to keep the CCD free of dust.
Note 3:
Perform when performing the photosensitive drum.
Note 4:
At time of replacing the scanning lamp.