Technical information

1-17
CHAPTER 1 GENERAL DESCRIPTION
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001
(1)
(2)
4.1.1 Instructions to the User
Instruct the user on the following:
1. When making a double-sided copy in manual mode, correct the curling along the lead-
ing edge of the paper by bending in opposite direction.
2. Keep in mind that paper is classified into the following six:
Plain: Most commonly used paper (80 to 105 g/m
2
)
Thin paper: Paper thinner than plain paper (64 to 79 g/m
2
)
Thick paper: Paper thicker than plain paper (106 to 163 g/m
2
)
Extra-thick paper: Paper thicker than thick paper (164 to 253 g/m
2
)
Transparency: Transparency film
Special paper 1: Paper identified by the notation Special Paper 1 on wrappings
Special paper 2: Paper identified by the notation Special Paper 2 on wrappings
3. About Transparencies
• Do not touch the copying surface. Hold it by the edges.
• Before placing transparencies in the cassette or in the multifeeder, fan them out to
separate the sheets.
• To prevent a jam, remove the processed transparency immediately upon delivery.
• Keep all transparencies in its package, and store the package avoiding a high-tempera-
ture/humidity environment.
4. Orientation of Transparencies
• In the Cassette Tray
Vertical: Place it so that the triangle in a corner is to the left front. (1)
Horizontal: Place it so that the triangle in a corner is to the right front. (2)
F01-401-02