Technical information

COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001
CHAPTER 3 INSTALLATION
3-31
Step Work Remarks
F03-600-04
Wire saddles
Control card connector
Control panel relay
connector
Screws
Screws
Screws
Screws
Claws
Face plate
F03-600-05
F03-600-06
7 Remove the control panel relay
connector and the two control card
connectors; free the harness for the
control card from the wire saddles
behind the control panel; then, turn over
the control panel.
8 Remove the 13 screws, and remove the
control panel back cover.
9 Remove the mounting screw from the
face plate; then, disengage the claw to
remove the face plate from the card slot.
10 Install the insulating sheet over the
display window for the control card on
the control panel.
11 Peel the protection sheet from the
control card.