Technical information

COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001
CHAPTER 3 INSTALLATION
3-27
Step Work Remarks
F03-400-01
F03-400-02
F03-400-03
Scanner metal fixing
Screw
Screw
Fixing
assembly
front cover
Knob
Screw
Fixing assembly
lever
Screws
Screw
Screw
Fixing assembly
upper cover
Screw Fixing assembly Screw
1 Tape the cover of the toner hopper in
place.
• Install the scanner metal fixing.
Insert the metal fixing through the
louver on the delivery side, and slide
it to the rear to fix the scanner mirror
mount in position.
Tape the metal fixing in place.
2 Open the copier’s front cover.
3 Release the lever of the fixing unit, and
slide out the fixing unit.
4 Open the external delivery unit and the
internal delivery unit; remove the fixing
assembly lever (2 screws), fixing
assembly knob (1 screw), and fixing
assembly front cover (2 screws); then,
remove the fixing assembly front cover.
5 Loosen the two screws, and open the
fixing assembly.
6 Remove the two screws, and open the
fixing assembly.
7 Remove the screw from the rear of the
upper oil pan; then, wait until all fixing
oil has collected in the oil tank.
4 Relocating the Machine