Technical information

COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001
CHAPTER 3 INSTALLATION
3-17
Grip
Step Work Remarks
F03-303-09
F03-303-10
F03-303-11
Process unit mount
Pressure releasing
member (front)
Pressuer releasing
member (rear)
Drum
[B]
[A]
Blade
Fixing screw
13 Install the two process unit grips that
come with the machine.
14 Slide out the process unit mount.
15 Loosen the mounting screw of the C
drum, and detach the photosensitive drum
cleaner pressure releasing members (rear).
Slide the pressure releasing member in an
arrow [A]. Perform the same for M, Y, and
Bk.
Push the center of the blade
(indicated by an arrow [B] )
with a finger to release the
pressure on the releasing
member.
Do not remove the protec-
tion sheet from the drum.