Technical information

COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001
CHAPTER 3 INSTALLATION
3-11
Belt unit
Cam
Locking plate
connector
Screw
Cleaner
blade
Inlet guide
Step Work Remarks
13 Turn the cam by hand so that the belt
unit is in UP position.
14 Disconnect the two connectors, and
loosen the screw ; then, shift the locking
plate to the left.
15 Push the cleaning blade to release the
pressure, and lift the middle of the inlet
guide.
When lifting the inlet guide,
be sure to support at its middle
to avoid deforming the guide.
F03-302-11
F03-302-12
F03-302-13