Technical information

2-245
CHAPTER 2 NEW FUNCTIONS
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001
9.7.4 Fans and Motors
a.Removing the Buffer Pass Motor (M1, M3)
1) Remove the rear cover.
2) Disconnect the two connectors [1], and
remove the two screws [2]; then, detach
the buffer pass motor [3].
F02-907-32
Memo
The buffer pass input motor
(M1) and the buffer pass output
motor (M3) may be disas-
sembled in the same way.
b. Removing the Reversal Motor (M2)
1) Remove the rear cover.
2) Remove the right front cover.
3) Disconnect the connector of the reversal
motor.
4) Remove the vertical path guide assem-
bly. (See F02-907-12.)
5) Remove the two screws [1], and detach
the reversal motor [2].
F02-907-33
[2]
[1]
[1]
[3]
[3]
[2]
[2]