Technical information

2-234
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001
CHAPTER 2 NEW FUNCTIONS
c. Removing the Feed Roller (vertical path; upper/lower)
1) Remove the rear cover.
2) Remove the right front cover.
3) Disconnect the connector [1]; then, dis-
connect the connector [2] of the reversal
motor. Thereafter, remove the six
screws [3], and detach the vertical path
guide assembly [4].
F02-907-12
4) Remove the four screws [5], and dis-
connect the connector [6]; then, detach
the reinforcing plate [7].
F02-907-13
[1]
[3]
[4]
[3]
[2]
[5]
[5]
[6]
[7]