Technical information

2-132
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001
CHAPTER 2 NEW FUNCTIONS
202mm/s 202mm/s*1
204mm/s
Separation sensor
(PS15)
Inside delivery sensor
(PS35)
Pre-fixing feed motor
(M11)
Fixing motor (M9)
Start key ON
Paper
length
Paper
length
45mm/s
6.8.2 Changing the Fixing Speed
*1: For feed speed, see “Controlling the Fixing Speed.”
F02-608-02
Immediately before the leading edge of paper leaves the separation sensor (PS15) and its
leading edge rushes into the fixing nip, the speed of the pre-fixing feed belt is changed;
then, the previous speed is used before the next sheet reaches the pre-fixing feeding assem-
bly.
In the case of the fixing roller, the rotation starts at a speed of warm-up rotation after the
start key is pressed, and the speed most suited to the transfer medium is used after the lead-
ing edge leaves the separation sensor.