Technical information

2-79
CHAPTER 2 NEW FUNCTIONS
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001
e.Removing the Transfer Belt Motor
1) Slide out the transfer unit assembly to
the front, and open the transfer belt as-
sembly. (See the instructions on how to
open the transfer belt.)
2) Disconnect the connector [1], and re-
move the three screws [2] and the ad-
justing screw [3]; then, detach the trans-
fer belt motor [4].
F02-405-71
f. Mounting the Transfer Belt Motor
1) Mount the motor by reversing the steps
used to remove it.
2) Check to make sure that the gap of the
adjusting screw [3] is 4.0 ±0.3 mm.
F02-405-72
[1]
[2]
[2]
[4]
[3]
[3]
4.0±0.3mm