Technical information

2-71
CHAPTER 2 NEW FUNCTIONS
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001
9) As if to lift the transfer belt assembly
[16] slightly, hook the pin of the trans-
fer unit fixing [1] on the hole [18] of the
transfer belt assembly [17]; at this time,
be sure that the hole of the transfer belt
assembly is securely engaged with the
groove of the pin.
[16]
[17]
[1]
[18]
F02-405-49
d-1. Removing the Transfer Belt (method 1)
• While keeping the transfer unit inside
the copier
1) Slide out the transfer unit assembly to
the front, and detach the pre-transfer
cover. (See F02-405-34.)
2) Shift up the separation guide [1], and
shift it to the rear to detach.
[1]
F02-405-50