Technical information

2-68
CHAPTER 2 NEW FUNCTIONS
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001
b. Cleaning the Transfer Blade
1) After performing step 5) for removing
the transfer blade, keep the transfer
blade assembly [1] upright as shown;
then, clean the blade [2] and the plastic
sheet [3] with lint-free paper or a
blower brush. (Be sure to keep the
strokes in one direction only.)
[1]
[2]
[3]
F02-405-40
c. Opening the Transfer Belt Assembly
1) Remove the hopper left cover and the
separation charging assembly; then,
mount the transfer unit fixing [1] to the
front side plate of the copier.
[1]
F02-405-41
2) Slide out the transfer unit.
3) Remove the two screws [2], and detach
the pre-transfer cover [3].
[2] [2]
[3]
F02-405-42