Technical information

2-61
CHAPTER 2 NEW FUNCTIONS
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001
5) Insert the positioning pin into the devel-
oping assembly.
6) Set the process unit case to the copier.
7) Secure the positioning pin in place with
the screw equipped with a spring.
When setting the process unit
case, be sure that the protrusion
on the inside of the flange of the
photosensitive drum is in the
groove in the drum shaft. Fur-
ther, take care not to force the
process unit to avoid damage to
the drum surface.
8) Slide out the transfer unit, and detach
the drum protection sheet [5] in the di-
rection of the arrow. (Be sure to store
away the removed drum protection
sheet.)
[5]
F02-405-25
Points to Note When Handling
the Drum Protection Sheet
■ Do not touch the area where
the drum will come into con-
tact.
■ Put it in a plastic bag, keep-
ing it away from dust, oil, or
the like.
■ If it must be rolled for stor-
age, be sure the side where
the drum will come into con-
tact will be the inner side.
■ Before putting it into use, be
sure to dry wipe the area
where the drum will come
into contact with lint-free pa-
per.