User`s guide

Setting Up a Computer for Printing/Sending a Fax (Windows/UNIX)
3-48
3
Using a TCP/IP Network
IMPORTANT
When manually entering a URL in [Printer URL] in the [Add Port] dialog box of Canon LPR2, use
the following format:
http://< the IP address or host name of the machine>/ipp
The installation of the driver and the port settings is complete.
Windows 2000/XP/Server 2003
NOTE
By installing Canon LPR2, you can also set IPP. Canon LPR2 enables you to easily set ports. For more
information, see the Canon LPR2 User's Guide (PDF manual). For instructions on how to display the
Canon LPR2 User's Guide, see the Network Quick Start Guide.
1 Check the settings for <RX/Print Range> in [IP Address Range
Settings] to see whether the IP address of the computer in which a
driver is to be installed is permitted. (See step 21 in "TCP/IP Settings,"
on p. 3-4.)
IMPORTANT
• If the settings for <RX/Print Range> in [IP Address Range Settings] do not permit the IP address,
you cannot install a driver.
• If the IP address of the computer is beyond the range of the permitted addresses for <RX/Print
Range> after installing a driver, you cannot print from the computer.