User`s guide

Setting Up a Computer for Printing/Sending a Fax (Windows/UNIX)
3-46
3
Using a TCP/IP Network
NOTE
• The admintool utility belongs to the operating system. For specific operating instructions, see the
operating system manual.
• The above procedures are only examples. The setup procedures for your environment may differ.
• You can specify a print queue. The following three print queues are available:
-LP
The machine prints according to its spool settings. Normally enter <LP> as a print queue.
- SPOOL
The machine prints only after spooling a print job on the hard disk regardless of its spool
settings.
-DIRECT
The machine prints without spooling a print job on the hard disk regardless of its spool settings.
• When the job record appears on the touch panel display of this machine, <unknown> may be
displayed as Document Name and User Name of printing data transmitted to this machine over
UNIX network.
(To display the job record, press [System Monitor]
➞ [Print] ➞ [Log] on the touch panel display in
this order.)
The print settings are complete.
Printer Connection Method (IPP)
The following is the procedure for specifying the port setting.
Windows 98/Me/NT 4.0
NOTE
• If you are using Windows 95/98/Me, you can also set IPP by installing the IPP Client software for
Windows 95/98/Me supplied by Microsoft.
• In the following procedures, items displayed on the screen for Windows 98 are used; items might differ
depending on your operating system.