User`s guide

Protocol Settings
3-28
3
Using a TCP/IP Network
❑ Press [Authent./Encryption].
Select the authentication method supported by the POP server from [Standard], [APOP], or
[POP AUTH].
❑ If you want to send encrypted data, press [On] for <Allow SSL (POP)>.
IMPORTANT
If the POP server does not support SSL encryption, data is not encrypted when [On] is selected
for <Allow SSL (POP)>.
❑ Press [OK].
The display returns to the E-mail/I-Fax screen.
6 Specify the mail server for sending e-mail/I-faxes.
● If you are using an SMTP server that requires POP before SMTP (method for
authenticating users who have logged in the POP server before sending
e-mail):
❑ Press [SMTP Server] ➞ enter an SMTP server IP address or name.
Input Example : IP address: 192.168.1.1
Name: smtp.organization.company.com