User`s guide

Protocol Settings
3-27
3
Using a TCP/IP Network
● If you want to receive e-mail/I-faxes using the POP server:
❑ Press [On] for <POP> ➞ press [Off] for <SMTP Receipt>.
❑ Press [E-mail Address] ➞ enter the e-mail address your machine will use.
Input Example : account1@pop_server.organization.company.com
(In this example the name of the POP server is
"pop_server.organization.company.com".)
❑ Press [POP Server] ➞ enter a POP server IP address or name.
Input Example : IP address: 192.168.1.1
Name: pop_server.organization.company.com
❑ Press [POP Address] ➞ enter the login name for access to the POP server.
Input Example : account1
❑ Press [POP Password] ➞ enter the password for access to the POP server.
❑ Press [-] and [+] or use - (numeric keys) to set [POP Interval] at the interval you want
the POP server to check for incoming e-mail.
If the interval is set to 0, the POP server is not checked automatically. For instructions on
how to manually check the POP server, see Chapter 8, "Checking/Changing the Send/
Receive Status," in the Sending and Facsimile Guide.