User`s guide

Protocol Settings
3-21
3
Using a TCP/IP Network
● If you want to restrict the IP addresses of computers on which the machine
setting items can be set or browsed using the Remote UI or utility:
❑ On the TCP/IP Settings screen, press [▼] or [▲] until [IP Address Range Settings] appears
➞ press [IP Address Range Settings].
❑ Press [Permit IP Address(es)] for <Setting/Browsing Range>.
❑ Select [On] for <Apply Settings>.
❑ Press [Register].
❑ If you want to store only one IP address, press [Single Address] to enter the IP address that
is to be permitted ➞ press [OK].
❑ If you want to store a range of IP addresses that are to be permitted, press [Multiple
Addresses] to specify [First Address] and [Last Address] ➞ press [OK].
❑ Press [OK].
❑ Press [Reject IP Address(es)] for <Setting/Browsing Range>.
❑ Select [On] for <Apply Settings>.
❑ Press [Register].