User`s guide

Protocol Settings
3-20
3
Using a TCP/IP Network
● If you do not want to restrict the IP addresses of computers on which the
machine setting items can be set or browsed using the Remote UI or utility:
❑ On the TCP/IP Settings screen, press [▼] or [▲] until [IP Address Range Settings] appears
➞ press [IP Address Range Settings].
❑ Press [Permit IP Address(es)] for <Setting/Browsing Range>.
❑ Select [Off] for <Apply Settings> ➞ press [OK].
❑ Press [Reject IP Address(es)] for <Setting/Browsing Range>.
❑ Select [Off] for [Apply Settings]➞ press [OK].