User`s guide

Protocol Settings
3-18
3
Using a TCP/IP Network
❑ Select [Off] for <Apply Settings> ➞ press [OK].
❑ Press [Reject IP Address(es)] for <RX/Print Range>.
❑ Select [Off] for <Apply Settings> ➞ press [OK].
● If you want to restrict the IP addresses of computers from which data (print/
fax/I-fax job) can be sent to the machine:
❑ On the TCP/IP Settings screen, press [▼] or [▲] until [IP Address Range Settings] appears
➞ press [IP Address Range Settings].
❑ Press [Permit IP Address(es)] for <RX/Print Range>.
❑ Select [On] for <Apply Settings>.
❑ Press [Register].