User`s guide

Protocol Settings
3-14
3
Using a TCP/IP Network
❑ Press [On] for [Use PASV Mode for FTP].
❑ Confirm the settings you specified ➞ press [OK].
The display returns to the TCP/IP Settings screen.
18 Specify the IPP settings.
● If you want to use IPP as the print application:
❑ On the TCP/IP Settings screen, press [▼] or [▲] until [IPP Settings] appears➞ press [IPP
Settings].
❑ Select [On].
Selecting [On] for [IPP Settings] automatically sets [Use HTTP] to [On].
❑ If you are using IPP authentication, press [On] for <Use Authentication> ➞ enter the user
name to use for IPP authentication in [User], and the password to use for IPP authentication
in [Password].
❑ Confirm the settings you specified ➞ press [OK].
The display returns to the TCP/IP Settings screen.