User`s guide

Protocol Settings
3-11
3
Using a TCP/IP Network
❑ If you want to establish bidirectional communication using Port9100, press [On] for <Use
Bidirectional>.
❑ Confirm the settings you specified ➞ press [OK].
The display returns to the TCP/IP Settings screen.
● If you do not want to use Raw as the print application:
❑ On the TCP/IP Settings screen, press [▼] or [▲] until [RAW Settings] appears ➞ press [RAW
Settings].
❑ Select [Off].
❑ Confirm the settings you specified ➞ press [OK].
The display returns to the TCP/IP Settings screen.
15 Specify the SNTP settings.
IMPORTANT
In order to perform time synchronization through SNTP, it is necessary to set the time zone of the
region in which you are using the machine in advance. For instructions on how to set the time
zone, see Chapter 6, "System Manager Settings," in the Reference Guide.
● If you want to perform time synchronization using SNTP:
❑ On the TCP/IP Settings screen, press [▼] or [▲] until [SNTP Settings] appears ➞ press
[SNTP Settings].
❑ Press [On] for <Use SNTP>.
Select the interval for performing time synchronization in <Polling Interval>. You can set the
interval to be between 1 and 48 hours.