User`s guide

Protocol Settings
3-10
3
Using a TCP/IP Network
❑ Press [On].
❑ If you want to print a banner page (the print job must be set to output a banner), press [On];
otherwise, press [Off].
Output of a banner page is set on a print-job basis. Even if [On] is selected for [LPD Banner
Page], a banner page cannot be output for a print job, when it is not set to output.
❑ Confirm the settings you specified ➞ press [OK].
The display returns to the TCP/IP Settings screen.
● If you do not want to use LPD as the print application:
❑ On the TCP/IP Settings screen, press [▼] or [▲] until [LPD Settings] appears ➞ press [LPD
Settings].
❑ Press [Off].
❑ Confirm the settings you specified ➞ press [OK].
The display returns to the TCP/IP Settings screen.
14 Specify the Raw settings.
● If you want to use Raw as the print application:
❑ On the TCP/IP Settings screen, press [▼] or [▲] until [RAW Settings] appears ➞ press [RAW
Settings].
❑ Select [On].