User`s guide

Interface Settings
2-15
2
Settings Common to the Network Protocols
NOTE
If [Auto Detect] is selected, the ring speed and communication method are specified
automatically.
6 Specify <Maximum Frame Size>.
Enter a value appropriate for your environment using - (numeric keys).
IMPORTANT
The machine may not work normally with the default settings. Enter a value appropriate for your
environment.
7 To perform source routing, select [On] for <Use Source Routing>.
If you select [Off] for <Use Source Routing>, skip to step 10.
The allowable combinations of <Token Ring Settings>: <Use Source Routing>, <All Broadcast
Request>, and <All Broadcast Response Notice> are shown below:
• Off/invalid/invalid
• On/On/invalid
• On/Off/On
• On/Off/Off
IMPORTANT
If the machine does not perform source routing correctly on a local network, select [Off] for <Use
Source Routing>.
8 To perform all broadcast request, select [On] for <All Broadcast
Request>.
If you select [On] for <All Broadcast Request>, skip to step 10.
9 To perform all broadcast response notice, select [On] for <All
Broadcast Response Notice>.
10 Specify <LAA Mode> on the Token Ring Settings screen.
❑
If you want to use an LAA (Locally Administered Address), select [On] ➞ press [LAA] ➞
enter the LAA.
The allowable range for an LAA is from 40 00 00 00 00 00 to 7F FF FF FF FF FF.