Manualshelf

User`s guide

ManualsBrandsCanon ManualsComputer equipmentCLC3220
21222324252627282930
Network Environment Setup Procedures
2-2
2
Settings Common to the Network Protocols
Network Environment Setup Procedures
Before using the machine in a network environment, it is necessary to perform the following
setup procedures.
1
Network Cable Connection (See "Connecting the Machine to a Computer or Network," on p. 2-3.)
Connect the machine to the network using the network cables.
2
Interface Settings (See "Interface Settings," on p. 2-9.)
Specify the interface settings for communication between the machine and computers on your network. To specify the settings,
use:
• The machine's control panel
• A web browser (Remote UI)
3
Communication Environment Setup (See "Communication Environment Setup," on p. 2-17.)
Set up a configuration for communication between the machine and computers on your network.
IMPORTANT
If you configure the interface settings for the first time, use the control panel of this machine. After
configuring the TCP/IP settings, you can change the content by using a web browser (Remote UI).