User`s guide

Protocol Settings
6-7
6
Using an AppleTalk Network (Macintosh)
6 Press [Service Name] ➞ enter the name of the printer.
The name you enter here appears in the Macintosh Chooser.
IMPORTANT
• The name of the printer can have up to 32 characters.
• If there is more than one printer in the same zone, each printer must have a unique name.
7 Press [Zone] ➞ enter a zone name.
If you are using a network that is set up in zones, enter the name of the zone.
You can also enter a zone name by pressing [Browse] and selecting the appropriate name from
the displayed list.
8 Confirm the settings you specified ➞ press [OK].
9 Press [Done] repeatedly until the Additional Functions screen closes.
10 Restart the machine.
❑
Turn OFF the machine, wait at least 10 seconds, and then turn it ON again.
NOTE
For instructions on how to turn ON/OFF the machine, see Chapter 1, "Before You Start Using
This Machine," in the Reference Guide.
The protocol settings are complete.