User`s guide

Protocol Settings
6-4
6
Using an AppleTalk Network (Macintosh)
Protocol Settings
You can specify the protocol settings for the machine by using any of the following:
• The machine's control panel
• A web browser (Remote UI)
• NetSpot Device Installer (Canon utility)
• A web browser (NetSpot Console) (Canon utility)
IMPORTANT
• To print from a computer, the optional equipment must be installed. For the equipment needed, see
"Optional Equipment and System Environment Requirements," on p. 1-2.
• To configure settings with software other than the control panel of the machine, TCP/IP protocol must be
supported by your network environment.
• Some items cannot be set using NetSpot Device Installer or NetSpot Console. For details about items
that can be set with NetSpot Device Installer or NetSpot Console, see "Network Setting Items," on p.
9-2.
• The following procedure describes sample settings using the control panel.
NOTE
• For instructions on how to enter settings using a web browser (Remote UI), see Chapter 3,
"Customizing Settings," in the Remote UI Guide.
• For more information on NetSpot Device Installer or NetSpot Console, see Chapter 7, "Using the
Network and Device Settings with Utilities."