Manualshelf

User`s guide

ManualsBrandsCanon ManualsComputer equipmentCLC3220
151152153154155156157158159160
Setting Up a Computer for Printing/Sending a Fax
5-15
5
Using a NetBIOS Network
2
Install the driver.
Install the driver according to the following procedures indicated in the manual for each driver:
• If you want to use the PCL printer driver
See the procedure for standard installation in Chapter 2, "Getting Started," in the PCL Driver
Guide.
• If you want to use the PS printer driver
See the procedure for standard installation in Chapter 2, "Getting Started," in the PS Driver
Guide.
• If you want to use the UFR printer driver
See the procedure for standard installation in Chapter 2, "Getting Started," in the UFR Driver
Guide.
• If you want to use the fax driver
See the procedure for standard installation in Chapter 2, "Getting Started," in the Fax Driver
Guide.
When the dialog box for selecting the port appears during installation, click [Use Network
Printer] ➞ [Settings]. From the list, select [Workgroup], [Server], and [Printer] you set in "SMB
and WINS Settings," on p. 5-4.
The port settings are complete.