User`s guide

Protocol Settings
5-8
5
Using a NetBIOS Network
12 To resolve the name with WINS, select [On].
Otherwise, select [Off].
If you select [Off], skip to step 14.
13 Specify the IP address of a WINS server.
IMPORTANT
If DHCP determines the IP address, the IP address obtained from a DHCP server is overwritten
with the IP address of a WINS server (obtained from the DHCP server), whenever possible.
14 Specify the [Scope ID] setting.
Enter the scope ID if necessary.
The scope ID is an identifier for determining the range available to a printer or computer.
Regardless of the [WINS Configuration] setting, a scope ID is referred to from the network.
IMPORTANT
• If you set a scope ID, the machine cannot communicate with any computer whose scope ID is
different from the scope ID you set here.
• If any scope ID is not set on computers in your network environment, leave this setting blank.
15 Confirm the settings you specified ➞ press [OK].
The display returns to the TCP/IP Settings screen.