User`s guide

Protocol Settings
5-3
5
Using a NetBIOS Network
Protocol Settings
You can specify the protocol settings for the machine by using any of the following:
• The machine's control panel
• A web browser (Remote UI)
• A web browser (NetSpot Console) (Canon utility)
IMPORTANT
• If you configure the TCP/IP settings for the first time, use the control panel of this machine or NetSpot
Device Installer. After configuring the settings, you can change the content by using a web browser
(Remote UI) or a web browser (NetSpot Console).
• Some items cannot be set using NetSpot Device Installer or NetSpot Console. For details about items
that can be set with NetSpot Device Installer or NetSpot Console, see "Network Setting Items," on p.
9-2.
NOTE
• For instructions on how to enter settings using a web browser (Remote UI), see Chapter 3,
"Customizing Settings," in the Remote UI Guide.
• For more information on NetSpot Device Installer or NetSpot Console, see Chapter 7, "Using the
Network and Device Settings with Utilities."
Settings from the Control Panel
The procedures for specifying the settings from the control panel are as follows.
IMPORTANT
Settings specified from the control panel become effective after the machine is restarted, after the
procedure.
NOTE
For instructions on how to enter characters using the touch panel display, see Chapter 2, "Basic
Operations," in the Reference Guide.