User`s guide

Protocol Settings

4-9

Using a NetWare Network (Windows)

Protocol Settings

You can specify the protocol settings for the machine by using any of the following:

• The machine's control panel

• A web browser (Remote UI)

• NetSpot Device Installer (Canon utility)

• A web browser (NetSpot Console) (Canon utility)

IMPORTANT

•

To configure settings with software other than the control panel of the machine or NetSpot Device

Installer, TCP/IP protocol must be supported by your network environment.

•

Some items cannot be set using NetSpot Device Installer or NetSpot Console. For details about items

that can be set with NetSpot Device Installer or NetSpot Console, see "Network Setting Items," on p.

9-2.

•

The following procedure describes sample settings using the control panel.

NOTE

•

For instructions on how to enter settings using a web browser (Remote UI), see Chapter 3,

"Customizing Settings," in the Remote UI Guide.

•

For more information on NetSpot Device Installer or NetSpot Console, see Chapter 7, "Using the

Network and Device Settings with Utilities."

Settings from the Control Panel

The procedure for specifying the settings from the control panel is as follows.

IMPORTANT

Settings made from the control panel become effective when the machine is restarted after the

procedure.

NOTE

For instructions on how to enter characters using the touch panel display, see Chapter 2, "Basic

Operations," in the Reference Guide.

Press .