User`s guide

NetWare Print Service Settings
4-6
4
Using a NetWare Network (Windows)
4 If you are using the remote printer mode, start the print server.
❑
If you are using the NetWare file server as a print server, enter <Load PSERVER.NLM> in
the file server ➞ press [ENTER] on the keyboard.
NOTE
If you are using the queue server mode, this step is not required.
NetWare print service settings are complete. Proceed to "Protocol Settings," on p. 4-9.
Using PCONSOLE in the Queue Server Mode or Remote Printer
Mode in the Bindery Mode (NetWare 3.2)
1 Log in to NetWare as Supervisor, and then start PCONSOLE.
2 If you have not set up a print server yet, set up the print server.
❑
On the [Available Options] menu, select [Print Server Information] ➞ press [ENTER] on the
keyboard.
❑ Press [INSERT] on the keyboard.
❑ Enter the name of the print server you are setting up ➞ press [ENTER] on the keyboard.
❑ Press [ESC] on the keyboard to return to the [Available Options] menu.
NOTE
Be sure to remember the name of the print server. You need it to specify the printer's protocol
settings.
3 Set up a Queue, and then assign the print server to the queue.
❑
On the [Available Options] menu, select [Print Queue Information] ➞ press [ENTER] on the
keyboard.
❑ Press [INSERT] on the keyboard.
❑ Enter the name of the queue you are setting up ➞ press [ENTER] on the keyboard.
❑ Select the name of the queue you specified ➞ press [ENTER] on the keyboard.
❑ Select [Queue Servers] ➞ press [ENTER] on the keyboard.