User`s guide

Setting Up a Computer as a File Server
3-70
3
Using a TCP/IP Network
The settings for sending data to the FTP server are complete.
FTP Server for iW Gateway
NOTE
An FTP server for iW Gateway is required for receiving data from the machine, when used with iW
Gateway.
1
Set up the FTP server for iW Gateway.
For details about the settings, see the iW Gateway User's Guide.
2
On the FTP server for iW Gateway, specify the folder to store data sent
from the machine.
For details about the settings, see the iW Gateway User's Guide.
NOTE
Up to 128 alphanumeric characters can be entered for a folder name.
Enter a user name and a password not longer than 24 alphanumeric characters.
3
On the FTP server for iW Gateway, export destination data.
For details about the settings, see the iW Gateway User's Guide.
IMPORTANT
A DNS server is needed to use an FQDN format (for example,
starfish.organization.company.com) for the FTP server address. (A DNS server is also required if
the machine and the FTP server are in the same subnet.) If you have not set up a DNS server,
use IP addresses.
Up to 128 alphanumeric characters can be entered for an FTP server address of the FQDN
format.
4
Use the web browser (Remote UI) of the machine to import the
destination data exported in step 3 into the machine.
Click [Add. Func.] of the web browser (Remote UI) click [Import/Export].
Click [Import] at the right window.
Select the address book of the import destination from [Address Book].
Select [Append] or [Overwrite] from [Import Method] to append the data to the address book
or overwrite the address book with the data.