User`s guide

Setting Up a Computer as a File Server

3-67

Using a TCP/IP Network

• The machine's recipient settings:

IMPORTANT

•

To use the host name of the above example for [Host Name], it is necessary to use a DNS

server. (This applies even if the machine and the FTP server are in the same subnet.) If no DNS

server is available, the host name setting should be specified using the IP address of the FTP

server.

•

Up to 128 alphanumeric characters can be entered for both [Host Name] and [File Path] on the

control panel. Use strings no more than 128 characters long for the corresponding items on the

server.

•

If you switch the language of the touch panel display, [Host Name] and [File Path] may not be

displayed correctly.

•

If the FTP port number is set to a value other than 21, specify the following for [Host Name]:

Example: 192.168.1.21:21000

NOTE

For instructions on how to specify recipient address settings, see Chapter 2, "Basic Sending

Methods," in the Sending and Facsimile Guide.

The settings for sending data to the FTP server are complete.

[Protocol]: FTP

[Host Name]: starfish.organization.company.com

[User]: User name entered in step 2

[Password]: Password for the above user

[File Path]: Enter one of the following:

share (when using relative path)

/home/hsato/share (when using absolute path)