User`s guide

Placing Originals
2-40
2
Basic Operations
Placing Originals
You can scan originals using this machine only if the optional Color Image Reader-C1 is
attached.
Place your originals on the platen glass or in the feeder, depending on the size and type of the
original, and the modes that you want to use.
NOTE
If the original has too many pages to be placed in the feeder all at once, use the Job Build mode on the
Special Features screen. (See Chapter 4, "Special Copying and Mail Box Features," in the Copying and
Mail Box Guide, and Chapter 4, "Special Scanning Features," in the Sending and Facsimile Guide.)
■ Platen Glass
Place the originals on the platen glass when scanning bound originals (such as books and magazines),
originals of heavy or lightweight paper, and transparencies.
■ Feeder
Place the originals in the feeder when you want to scan several originals at the same time, and press .
The machine automatically feeds the originals onto the platen glass and scans them. Two-sided originals
can also be automatically turned over and scanned as two-sided documents.
Document Sizes
The size of the original is automatically detected, and the document is scanned. However, when
sending a fax, if the output paper in the machine at the receiving end is not equal to the
scanned size, the original image is either reduced in size to match the size of the output paper
at the receiving end, or is divided into parts before being sent.
The machine cannot always detect the size of the original if it is a nonstandard paper size, such
as a book.
In this case, specify the size at which you want to scan the original. (See Chapter 3, "Basic
Scanning Feature," in the Sending and Facsimile Guide.)