User`s guide

Entering the Department ID and Password
2-35
2
Basic Operations
3 When your operations are complete, press on the control panel.
If you are using a control card, remove the control card, and take it with you. (See "Card
Reader-D1," on p. 3-24.)
The screen for entering the Department ID and password appears.
NOTE
• To perform operations again, you have to re-enter the Department ID and password.
• If you do not press after you are finished operating the machine, any subsequent copies made
are added to the total of the Department ID you previously entered.
• Even if you forget to press after you are finished operating the machine, the screen for
entering the Department ID and password automatically appears after the set Auto Clear Time
elapses. (See "Auto Clear Time," on p. 4-52.)
• After pressing , all settings are cancelled, and the machine returns to the Standard mode.