User`s guide

Entering Characters from the Touch Panel Display
2-32
2
Basic Operations
Values in Inches
If you want to enter values in inches in all modes which require a numeric entry, set Inch Entry
to 'On' in Common Settings (from the Additional Functions screen). (See "Inch Entry," on p.
4-22.) You can then enter values in inches when you press [Inch] on a screen requiring a
numeric entry or measurement.
The following example shows you how to enter 1 1/2" for Original Size in the Zoom Program
mode.
1 Press [1] ➞ [_] ➞ [1] ➞ [/] ➞ [2] using the numeric keys on the touch
panel display.
The entered values are displayed, as shown above.
NOTE
• If you make a mistake when entering values, press [C] on the touch panel display ➞ enter the
correct values.
• You can enter only 2, 4, 8, or 16 as the denominator.
• The value entered in inches is converted to millimetres by the machine each time it is entered.
Thus, there may be a slight difference between the value calculated and the actual value
entered.
• To enter values in millimetres, press [mm].