User`s guide

Overview of the CLC3220/iR C3220N
2-21
2
Basic Operations
Other Useful Functions
Other useful functions are:
■ Auto Drawer Switching
If a paper drawer runs out of paper during printing, the machine automatically locates another paper
drawer loaded with the same size paper, and begins feeding paper from that paper drawer.
NOTE
You can set whether a paper drawer is subject to Auto Drawer Switching for each function. The default
setting is 'Off' for the stack bypass, and 'On' for the other paper drawers. (See "Auto Paper Selection/
Auto Drawer Switching," on p. 4-23.)
■ Auto Clear
If the machine is not used for a period of about two minutes after the last print job or a key operation is
performed, the machine automatically restores the standard settings.
NOTE
You can set the Auto Clear Time from 0 to 9 minutes, in one minute increments. The default setting is '2'
minutes. (See "Auto Clear Time," on p. 4-52.)
■ Job Duration Display
If you set Job Duration Display to 'On' in Copy Settings (from the Additional Functions screen), the
display shows the time duration before a copy job completes.
NOTE
• Even if Job Duration Display is set to 'On', the job duration time is not displayed when:
- the wait time is less than one minute.
- the Different Size Originals mode is set with the 1 2-Sided or 2 2-Sided mode.
- heavy paper or transparency is selected as the paper type.
- paper is fed from the stack bypass.
• If the Staple mode is specified, the discrepancy between the displayed waiting time and the actual
waiting time may increase.