User`s guide

Overview of the CLC3220/iR C3220N

2-14

Basic Operations

■ Auto Sleep Mode

You can set the machine to enter the Sleep mode whenever you desire, by pressing the control panel

power switch, or specify to have the machine enter the Sleep mode at a preset time. To reactivate the

machine, press the control panel power switch again.

NOTE

•

The machine may not enter the Sleep mode completely depending on the status and type of the

installed MEAP applications.

•

Turn the control panel power switch OFF when not using the machine for a prolonged period of time, for

example, at night.

•

The time it takes for the machine to automatically enter the Sleep mode can be set from 10 minutes to 4

hours. The default setting is '1 hour'. (See "Auto Sleep Time," on p. 4-51.)

•

If Energy Consumption in Sleep Mode is set to 'Low', it may take more than 10 seconds for the touch

panel display to be displayed after pressing the control panel power switch.

■ Energy Saver Mode

The Energy Saver mode conserves energy by lowering the temperature of the fixing unit when the

machine is not used for a prolonged period of time. You can set the machine to enter the Energy Saver

mode by pressing . To reactivate the machine, press again.

NOTE

The Energy Saver mode's energy conservation level can be set to '-10%', '-25%', '-50%', or 'None'. The

default setting is '-10%'. (See "Energy Saver Mode," on p. 4-28.)

■ Low-Power Mode

The Low-Power mode conserves energy by turning OFF the control panel and the fixing unit when the

machine is idle for a certain period of time after the last print job or a key operation is performed.

maintains a steady green light while the machine is in the Low-Power mode. To reactivate the machine,

press .

NOTE

The time it takes for the machine to automatically enter the Low-Power mode can be set from 10

minutes to 4 hours. The default setting is '15 minutes'. (See "Low-Power Mode Time," on p. 4-53.)

■ Daily Timer

The machine automatically enters the Sleep mode at the specified time and day of the week set with the

daily timer. To reactivate the machine, press the control panel power switch.

NOTE

The Daily Timer settings can be set from Sunday to Saturday and 00:00 to 23:59. (See "Daily Timer

Settings," on p. 4-52.)