User`s guide

Main Power and Control Panel Power
1-22
1
Before You Start Using This Machine
NOTE
For instructions on entering the Department ID and password, see "Entering the Department ID
and Password," on p. 2-33.
● If the message <Enter a user name and password and press the [Log In] key.>
appears:
❑ Press [User Name] ➞ enter the user name ➞ press [OK].
❑ Press [Password] ➞ enter the password ➞ press [OK].
❑ Press [Log In].
The SDL Screen
The Basic Features screen is displayed.
NOTE
For instructions on how to enter the user name and password on the MEAP authentication
screen, see "Using a Login Service," p. 2-36.