User`s guide

Main Power and Control Panel Power
1-20
1
Before You Start Using This Machine
● If login authentication by the SDL or SSO login service is set:
❑ The Start Up screen is displayed until the machine is ready to scan.
❑ After the Start Up screen disappears, the MEAP Start Up screen is displayed regardless of
the Initial Function settings. (The background colour of the screen is changed to brown.)
IMPORTANT
• If you turn OFF the main power, wait at least 10 seconds before turning the main power back ON.
• Do not turn the main power OFF if the optional Color Universal Send Kit or Super G3 FAX Board,
and Resolution Switching Board are attached, and you want to be able to send or receive I-fax or
fax documents. Sending or receiving I-fax or fax documents cannot be done when the power is
turned OFF.
• If SSO or SDL is set as the login service, the machine will take longer to become ready to scan.