User`s guide

List of Error Messages
8-70
8
Troubleshooting
Load A4 size paper.
Cause The optimum paper size selected by the Automatic Paper Selection mode is not available in
the machine.
Remedy 1 Load the indicated paper size into the machine. If you press while this message is
displayed, prints are made with the currently selected paper size.
Remedy 2 If the message continues to be displayed even if the indicated paper size is loaded, set
Drawer Eligibility For APS/ADS in Common Settings (from the Additional Functions screen)
for that paper drawer to 'On'. (See "Auto Paper Selection/Auto Drawer Switching," on p.
4-23.)
Return page 1 to the top, and then press the Start key.
Cause Scanning was stopped due to a problem with the optional feeder.
Remedy Arrange the originals in page order with the first page on top. Place the originals back in the
feeder's original supply tray, and press .
Remove the paper from the output tray.
Cause Prints from the previous job remain in the output tray.
Remedy Remove the prints remaining in the output tray. Printing automatically resumes.
Remove the paper from the booklet tray.
Cause Prints from the previous job remain in the Booklet tray of the optional Saddle Finisher-N2.
Remedy Remove the prints remaining in the Booklet tray. Printing automatically resumes.
Attach the Finisher to the main unit.
Cause The finisher is not properly connected to the main unit.
Remedy Connect the finisher to the main unit properly. (See "Finisher-N1/Saddle Finisher-N2
(Optional)," on p. 8-49.)
Paper is jammed in the indicated location. Remove the jammed paper.
Cause An original or paper has jammed in the machine, preventing prints from being made.
Remedy Remove the jammed original or paper from the machine by following the instructions on the
touch panel display. (See "Clearing Paper Jams," on p. 8-3.)