User`s guide

Clearing Staple Jams
8-64
8
Troubleshooting
Saddle Stitcher Unit (Optional)
If a staple jam occurs inside the saddle stitcher unit of the optional Saddle Finisher-N2, a screen
similar to the one shown below appears on the touch panel display. Check the location of the
staple jam, and follow the procedure described below, and the procedure that appears on the
touch panel display, to remove any jammed staples.
IMPORTANT
• If necessary, make sure to remove all of the paper in the Booklet tray before clearing a staple jam inside
the saddle stitcher unit.
• This procedure is only necessary if the optional Saddle Finisher-N2 is attached.
1 Open the lower front cover of the finisher.