User`s guide

Clearing Paper Jams
8-14
8
Troubleshooting
6 Return the fixing unit's pressure release lever to its original position.
7 Place your hands where the hand symbol ( ) is located on the main
unit's exit slot cover, and gently push the fixing unit back into the
machine.
If the optional Finisher-M1, Finisher-N1, or Saddle Finisher-N2 was moved away from the main
unit, reconnect it to the main unit. For more information, see "Finisher-M1," on p. 3-12, or
"Finisher-N1/Saddle Finisher-N2," on p. 3-16.
CAUTION
• Make sure that the fixing unit is returned to its original position properly, as failure to
do so may result in damage to the machine.
• When pushing the fixing unit back into the machine, be careful not to get your fingers
caught, as this may result in personal injury.