User`s guide

Clearing Paper Jams
8-11
8
Troubleshooting
Exit Slot Cover
If a paper jam occurs inside the exit slot cover, a screen similar to the one shown below appears
on the touch panel display. Check the location of the paper jam, and follow the procedure
described below, and the procedure that appears on the touch panel display, to remove the
jammed paper.
CAUTION
The fixing unit and its surroundings inside the machine may become hot during use. When
removing jammed paper or when inspecting the inside of the machine, do not touch the fixing
unit and its surroundings, as doing so may result in burns or electrical shock.
1 Grip the handle on the main unit's exit slot cover, and pull out the
fixing unit until the fixing unit's pressure release lever is visible.
If the optional Finisher-M1, Finisher-N1, or Saddle Finisher-N2 is attached to the main unit,
move the finisher away from the main unit before proceeding with this procedure. For more
information, see "Finisher-M1," on p. 3-12, or "Finisher-N1/Saddle Finisher-N2," on p. 3-16.