User`s guide

Finisher-N1/Saddle Finisher-N2 (Optional)
7-25
7
Routine Maintenance
IMPORTANT
• This procedure is necessary only if the optional Saddle Finisher-N2 is attached.
• If necessary, remove all of the output paper in the Booklet Tray before replacing the staple cartridge in
the saddle stitcher unit.
NOTE
We recommend that you order staple cartridges from your local authorized Canon dealer before your
stock runs out.
1 Open the lower front cover of the finisher.
2 Grip the saddle stitcher unit by its handle, and pull it out of the finisher
until it stops.