User`s guide

Finisher-N1/Saddle Finisher-N2 (Optional)
7-24
7
Routine Maintenance
8 Make sure that the staple case is firmly secured, and close the upper
front cover.
CAUTION
When closing the cover, be careful not to get your fingers caught, as this may result in
personal injury.
NOTE
If there are no staples ready for stapling after the cover is closed, the stapler unit automatically
performs a "dry" stapling operation to reposition the staples.
Replacing the Staple Cartridge in the Saddle Stitcher Unit
When the saddle stitcher unit of the optional Saddle Finisher-N2 is almost out of staples, and
the staple cartridge must be replaced, a screen similar to the one shown below appears on the
touch panel display. Follow the procedure described below to replace the staple cartridge.
Use only staple cartridges intended for use with this machine.