User`s guide

Adjusting the Machine
4-61
4
Customizing Settings
Exposure Recalibration
You can recalibrate the exposure adjustment scale if differences between the image in the
original and the print occur.
NOTE
The default setting is in the middle (5), on a scale of 1 to 9.
1 Press ➞ [Adjustment/Cleaning] ➞ [Exposure Recalibration].
2 Press [Light] or [Dark] for each function to adjust the exposure ➞
press [OK].
<Copy/Inbox> appears only if the optional Color Image Reader-C1 is attached.
<Send (B & W)> and <Send (Color)> appear only if the optional Color Image Reader-C1, Color
Universal Send Kit, Super G3 FAX Board, and Resolution Switching Board are installed, or if
only the optional Color Image Reader-C1, Color Universal Send Kit, and Resolution Switching
Board are installed.
<Send> appears only if the optional Color Image Reader-C1, Super G3 FAX Board, and
Resolution Switching Board are installed.
The selected mode is set.
Cleaning the Inside of the Main Unit
If streaks appear on printed output or random parts of the printed image are missing, the inside
of the main unit may be dirty. If this happens, clean the inside of the main unit, as described
below.
NOTE
It takes about 90 seconds to clean the inside of the main unit.
1 Press ➞ [Adjustment/Cleaning] ➞ [Cleaning inside Main Unit].