User`s guide

Adjusting the Machine
4-60
4
Customizing Settings
5 Press [Start Scan].
The message <Scanning...> appears.
6 Remove the first test print from the platen glass ➞ press [Test Print 2].
The message <Printing...> appears.
Test Print 2 is printed.
7 Place the second test print on the platen glass.
Place the test print face down on the platen glass, with the black bands along the top left back
edge of the platen glass by the arrow.
8 Press [Start Scan].
The message <Scanning...> appears.
9 Remove the second test print from the platen glass ➞ press [Test Print
3].
The message <Printing...> appears.
Test Print 3 is printed.
10 Place the third test print on the platen glass.
Place the test print face down on the platen glass, with the black bands along the top left back
edge of the platen glass by the arrow.
11 Press [Start Scan].
When scanning is complete, the gradation adjustment begins. The message <Adjusting...>
appears.
When the machine is finished adjusting the gradation settings, the message <Full Adjustment
Complete.> appears for approximately two seconds on the touch panel display.
The display returns to the Adjustment/Cleaning screen.
12 Remove the third test print from the platen glass.