User`s guide

Adjusting the Machine
4-58
4
Customizing Settings
2 Select the paper type for the gradation adjustment ➞press [Quick
Adjust].
IMPORTANT
The machine automatically adjusts the amount of toner and the speed of printing, depending on
the paper type selected. Select the proper paper type in order to perform the adjustment
effectively.
3 Press [Start].
A screen informing you that the gradation is being adjusted appears.
When the machine is finished adjusting the gradation settings, the message <Quick adjustment
complete.> appears for approximately two seconds on the touch panel display.
Full Adjustment
IMPORTANT
• Make sure that you place the test prints properly. Accurate recalibrations of the gradation, density, and
colour settings of the machine cannot be made if the test prints are not scanned correctly.
• Three test prints are output by the machine during this adjustment. Make sure that a sufficient supply of
A3, A4, 11" x 17", or LTR paper of the selected paper type is loaded into the machine before starting this
procedure.
NOTE
Test prints are not counted as part of the copy or print total page counts.